Magnific
When this particular coffee machine started acting strangely, there didn’t seem to be any obvious explanation.
It wasn’t completely dead, but almost nothing was working the way it should.
There are plenty of components that can cause trouble in a large machine like this, so the technician began checking everything from the power supply and wiring to the pump, boilers, and sensors.
The issue seemed like a mystery until he noticed a small component that stood out from the rest.
Read the full story below.
I got called to check a vending machine that was acting completely crazy. It wasn’t dead, but nothing worked properly.
The controls were all over the place, it kept checking the boiler, but wouldn’t actually start anything.
It was a pretty big coffee machine, so I expected some clear fault.
I start going through everything, power, wiring, pump, boilers, sensors, but nothing really made sense.
No obvious issue, yet the machine was basically unusable.
It seemed to be a complex issue.
So I start tracing everything back more carefully.
Eventually I get to the power input area and notice the fuse looks… off.
I pull it out, and that’s when it hits me.
It wasn’t really a fuse anymore. It was wrapped in aluminum foil like some kind of “fuse sandwich”.
This is a cautionary tale.
Turns out the customer had “fixed” it instead of replacing it.
So instead of blowing like it should, it kept letting unstable current through, which ended up damaging the control board and messing with the machine logic.
What could have been a cheap fix turned into about a 400€ repair.
All because of a “quick fix”.
What did Reddit think?
A reader shares their thoughts.
Never Miss a Story
Sign up to get our BEST stories of the week straight to your inbox.
Yikes.
Something to consider.
Another reader chimes in.
If you enjoyed this story, check out this post about a customer who wants to argue about an item they chose not being on sale.
🤔
Instead of replacing the fuse, the customer decided to improvise.
Wrapping it in aluminum foil may have seemed like a quick and harmless solution, but it effectively defeated the protection the fuse was supposed to provide since the unstable current continued flowing and eventually damaged the control board, turning a simple fuse replacement into a very expensive repair.
The original problem could have been so cheap to fix.
Enjoyed this story?
